How to Hang A Banner In Mid Air

1) String aircraft wire above and below where the banner will be hung. Aircraft wire should be of a gauge that will not stretch and sway, and must be made tight by use of turnbuckles.

2) Then attach the banner with clips or plastic ties through the grommets on top and bottom wires. (If you buy the banner from us, we'll sew special metal clips into the banner, leaving the grommets for other installation methods.) This allows the banner to slide left to right.

3) Then pull rope (we sew in nylon webbing that is stronger than most rope.) from the four corners of the banner to position it, and pull tight.
This way, the wind stress will be borne by the aircraft wire and the banner will not tear. If high wind conditions exist, we can cut wind holes in the banner.